Directions for NanoFlex Application

Nailing

Choose the correct size shoe, small medium or large, front or rear. Sometimes the front shoes fit the rear hooves better, and vice versa.
                     ****MAKE ABLOLUTELY SURE****
To sink all nail heads flush with the top of the shoe, also be absolutely sure to put all nails as far inward towards the white line as possible.
Put the first nail in the center of the toe. Put four nails on each side, one inch apart from the center nail, putting the last nail as low as possible towards the heels.

If the size you choose is smaller than the hoof, use the next size larger, and snip or rasp it to fit, or spread the shoe open using a shoe spreader. If the shoe chosen is larger or the hoof is odd shaped, cut the arc bar in the middle, and after putting the first nail in the center of the hoof, hand shape the shoe as you nail down towards the heels. Overlap the two ends of the arc bar and crazy glue them together.

Gluing

The NanoFlex nail on shoe can also be glued on. Vettec is the recommended adhesive, but Equilox works also. The NanoFlex glue-on shoe will be available soon at the same price.

For more info call 877-815-6512 or 954-857-6337